Backflow test prices are set by each tester, and I found no government or utility price list for Sacramento, so this page gives no dollar range. Ask each tester for the price of the test, the report filing and any repair in writing. Sacramento prices vary, and the specialist you hire quotes the real one.
Backflow devices protect the drinking water supply, and testing is a regular, required chore for many properties. The page on backflow and commercial plumbing covers what the devices do and who needs them. This page covers the cost of the test, the repair and the replacement. You can get quotes from local specialists on the quote page.
How much does backflow testing cost?
Testers set their own fees. Several things change the quote: a basic residential test on a lawn sprinkler system is simpler than a test on a larger or more complex assembly, such as a reduced pressure principle (RP) device, a double check or a fire line. Multiple devices at one site often get a lower price each, so ask.
Ask whether the report filing is included in the price. Many testers offer a lower price for a bundle of assemblies or for an annual agreement.
How much does it cost to test a residential backflow preventer?
Most homes have a backflow preventer on the irrigation system, and some have one on the main water line or a pool fill line. The tester attaches a gauge, checks that the check valves and relief valve work and records the result.
If the assembly passes, the tester files or hands you the report, depending on local rules, and the job is done until next year. If it fails, the tester explains what failed and quotes a repair. Many failures come from fouled check valves, a worn seal or a stuck relief valve, and the fix is often a rebuild kit and an hour of labor.
Residential backflow testing cost can look high compared with the time spent, but the price covers the tester's calibrated gauge, travel, certification and the paperwork. A tester who also repairs on the spot can save a second visit.
Why does backflow testing cost what it does, and who has to do it?
Backflow assemblies must be tested by a tester holding a state-recognized certification, and the City of Sacramento's cross-connection control page says state regulations require property owners to have their backflow prevention assemblies tested annually by a tester holding a state-recognized certification. The test confirms the device would stop dirty water from flowing back into the public supply. The city also publishes a list of tester holding a state-recognized certifications.
The rules can differ by water provider. The City of Sacramento has its program, and Sacramento County and other water districts have separate programs with their own tester lists, registration and reporting. Check with your water provider to find which program covers your address, whether your tester must be registered with them and how the report is filed. Do not assume that a tester from one list is accepted by another provider.
The price you pay covers more than the 30 minutes on site:
- A tester must hold current certification and calibrate the test kit gauge on a schedule.
- The tester files the result with the water provider, in some cases electronically.
- Many testers carry rebuild parts and repair on the spot.
- Travel across Sacramento adds time on multi-site routes.
Testing is not a DIY job. The test must be done by a tester holding a state-recognized certification and reported to the water provider for it to count.
What do backflow repair and replacement cost?
A backflow repair after a failed test depends on the parts. A rebuild kit for a standard residential assembly is cheap, and labor is an hour or two. A replacement assembly costs more, depending on size, type and how much pipe work is involved. Ask for the repair and replacement prices in writing.
Installing a new assembly generally needs a permit and an inspection, and it has to be placed in the position the water provider requires, at a set height and clearance. Many providers also require a new device to be on their approved list. Ask the plumber and your water provider before you buy a unit.
Wear is one cause of failure. Debris in the irrigation line, a sprinkler head that stays open and age also play a part. Sacramento winters are mild, so freeze damage is uncommon, but it can occur on an exposed assembly during a rare cold snap. A cover is an inexpensive precaution if the device sits above ground.
What pushes the price of backflow testing up or down?
Six things matter: assembly type and size, number of devices, accessibility, the condition of the device, who is filing the report and the time of the visit. A small irrigation device in an open yard is quick. A large commercial assembly in a mechanical room or a pit with limited access is slower.
- Type and size. RP assemblies take longer to test than a simple device, and larger pipe sizes take more time.
- Number of assemblies. Testing several at one visit lowers the per-device cost.
- Access. Buried vaults, ceiling-height devices and locked enclosures add time.
- Condition. A device that fails needs a repair quote or a replacement.
- Reporting. Some testers include the filing in the price, and others bill a small fee.
- Timing. Rush tests, deadline-driven tests and after-hours calls cost more. Water providers typically send notices in advance, so schedule early.
- Annual agreements. Some testers offer a discount for yearly service, which is useful if you have several devices.
Businesses such as restaurants, medical offices, car washes, buildings with fire sprinklers and properties with irrigation commonly have devices that need annual testing. Homes with lawn sprinklers usually have one too.
How do you compare backflow testing quotes?
Compare quotes by asking whether the price is per assembly, whether report filing is included, whether the tester is on your water provider's approved list and what a repair would cost if the device fails. A low test fee that comes with an inflated repair price is not a saving. Ask for the repair rate before the test.
Ask each company for the tester's certification number and confirm it with your water provider or the published list. For repairs or replacement over $1,000, California also requires a contractor with the right California license under Contractors State License Board rules, so ask for the contractor license number and check it on the state board's website. For general rates, see the plumber cost guide. The Sactown Plumbing Guide home page lists other topics.
Questions people ask
How long does backflow testing take?
A residential test usually takes 15 to 45 minutes per assembly. A commercial test on a large or buried device can take an hour or more. If the device fails, a repair on the spot often adds an hour, and the tester retests it to confirm it passes before filing the report.
What should I ask before I hire someone for backflow testing?
Ask whether the tester holds a state-recognized certification and is on your water provider's list, whether the price is per assembly, whether report filing is included, what a repair would cost and how soon you can be scheduled. Ask for a written quote and whether the tester also does the repair or replacement if the device fails.
Do I need to be home for backflow testing?
Not always, but someone should provide access to the assembly, whether that is a gate, a locked room or a vault. Water is shut off briefly during the test, so tell anyone using it. If the device fails and needs repair, an adult should be available to approve the work and the cost.
How often is backflow testing required?
The City of Sacramento says state regulations require property owners to have their backflow prevention assemblies tested annually by a tester holding a state-recognized certification. Your water provider sets the schedule and the reporting rules, and it may send a notice when your test is due. Ask your provider what happens if a test is missed.
What happens if my backflow preventer fails the test?
The tester explains what failed and quotes a repair. Many failures are fixed with a rebuild kit or a new seal, after which the device is retested. If the assembly is worn out or damaged, it must be replaced. Until the device passes, the water provider may require follow-up, so repair it promptly.
Sources used
Last changed
