If your water heater is leaking from the tank, is past 10 to 15 years old or needs a repair that costs close to half a new one, a plumber replaces it: shuts off and drains the old tank, sets a new one, reconnects water and gas or power, straps it and tests it. Check the water heater repair and replacement guide if you are still deciding whether repair is enough.
In California, replacement is regulated work. A contractor needs a license for jobs of $1,000 or more in labor and materials, and most replacements pass that line. A permit applies in the City of Sacramento. This page covers the process, the price, who does what and the questions to ask.
What does a plumber do when replacing a water heater?
A plumber turns off the energy and water, drains and disconnects the old tank, hauls it away and positions the new heater on a stand or platform where needed. The plumber reconnects the water lines, the relief valve and its discharge pipe, then connects gas and vent or the electric supply, straps the tank to the wall, fills it, checks for leaks and tests the controls.

A standard tank replacement usually takes about two to four hours. A good plumber also does these checks that cheaper quotes sometimes skip:
- New flexible water connectors, a new gas connector for gas models and a working shutoff valve.
- A relief valve with a discharge pipe that ends in a safe place.
- Seismic straps. California requires water heaters to be braced under Health and Safety Code section 19211, which refers to the California Plumbing Code.
- An expansion tank where the water system is closed.
- Venting that draws properly on gas models, tested for spillage.
- A check that the thermostat is set around 120 degrees Fahrenheit.
What does water heater replacement cost in Sacramento?
This Old House's water heater cost guide (updated June 2026) puts an installed tank water heater at $1,200 to $2,300, a tankless unit at $2,100 to $4,000 and a heat pump model at $2,500 to $3,500. What moves the price is fuel type, size, venting, the permit, any code upgrades and where the heater sits. The plumber quotes the real total after seeing the unit, and Sacramento prices vary.
Ask the quote to separate the line items, so you can compare plumbers on equal terms:
| Item | What to look for |
|---|---|
| Heater | Brand, size, first-hour rating, warranty length |
| Labor | Hours, or a flat price for the whole job |
| Permit | Whether it is included and who pulls it |
| Parts | Straps, connectors, relief valve, discharge pipe, expansion tank |
| Disposal | Old tank haul-away |
| Code work | Venting, gas line, circuit or panel changes |
For a fuller breakdown, see water heater replacement cost. If you are weighing fuel types, electric vs gas explains the trade-offs. People ask whether a 40 gallon unit is enough: often for two or three people, with 50 gallons the safer choice for a busy household of four.
Does a replacement need a permit?
Yes in the City of Sacramento. The city lists building permit and related fees for residential water heater new or replacement work, and offers an online permit process for a residential water heater change-out. County and other jurisdictions have their own rules, so ask the plumber which office covers your address and who is responsible for the permit.
A permit brings an inspection that checks the connections, the vent, the relief valve and the bracing. Skipping it can cause trouble when you sell the house or file an insurance claim after a leak. Be wary of a plumber who suggests skipping the permit to save money. You can check a plumber's license on the California Contractors State License Board site, and plumbing contractors hold the C-36 classification.
What to do next if your heater just failed
Shut off the power at the breaker or turn the gas control to off, close the cold water valve on top of the tank and, if it is leaking, drain it slowly to a floor drain or outside. Take photos of any damage. Then request two or three quotes from local specialists so you can compare price, timing and what each includes.
Do not wait if the tank is leaking onto a finished floor or a wall. If the problem is urgent, see emergency water heater repair. If the water is simply lukewarm or not hot, run through no hot water first, since a cheap part may be the cause. When you are ready to compare plumbers, use the quote page to ask local specialists for a written price.
When to call a plumber business, and when a repair is enough
Call a plumber business when the tank leaks from the shell, when the unit is older than about 10 to 12 years and failing, when you have a gas smell, or when the work involves gas lines, venting or moving the heater. A repair is enough for a worn element, thermostat, igniter or relief valve on a tank that is otherwise sound.
If you are unsure, the plumber's diagnosis is the deciding step. Ask for the repair price and the replacement price side by side. Our page on how long a water heater lasts shows how to judge the remaining life. A heater that is past its life and also needs a costly part is usually a replacement. For the home of this guide and other topics, start at the Sactown Plumbing Guide.
Before the plumber starts, clear the area around the heater, make sure someone can open the garage or closet, and point out the main shutoff valves. Note any existing problems with the gas line or the vent so they are fixed as part of the job, not found later.
How do you compare plumbers for a water heater replacement?
Compare at least two or three written quotes on the same size and fuel, and check what each includes. A lower price that leaves out the permit, straps or disposal is not really lower. Ask for the license number, and what the labor warranty covers.
Warning signs include a price quoted before anyone has seen the heater, pressure to decide the same minute, a request for full payment up front and no mention of a permit. A good plumber explains why a particular size or model suits your household. If the quote adds an expansion tank or a vent change, ask why. The page on how a job runs explains the sequence of a typical job from first call to final test.
Questions people ask
How long does plumber for water heater replacement take?
Most tank replacements take about two to four hours once the plumber arrives, including draining the old unit, setting the new one, bracing, filling and testing. Moving the heater, changing fuel or fixing venting adds time. The permit inspection may be a separate visit. Ask the plumber for the full timeline and when hot water returns.
What should I ask before I hire someone for plumber for water heater replacement?
Ask for a license number and check it online with the California Contractors State License Board. Ask for a written itemized price that covers the permit, straps, relief valve, discharge pipe, disposal and any code work. Ask about the manufacturer warranty, the labor warranty and what happens if the new unit leaks.
Do I need to be home for plumber for water heater replacement?
You should be there at the start to give access and approve the price, and at the end to see the unit tested. Hot water is off for some hours. If you cannot attend, an adult you trust can stand in. Make sure the plumber can reach the heater, the shutoff valves and the breaker panel.
Sources used
Last changed
